Difference between revisions of Optics related math

Divenal (talk | contribs)
m Infinity: minor rewording, to paint a picture of the object moving towards the lens continuously, rather than just jumping straight from infinity to the focus.
Angel (talk | contribs)
No edit summary
 
(10 intermediate revisions by 2 users not shown)
Line 1: Line 1:
[[File:Math guy with glasses.gif|right]]
{{gif fixer|[[File:Math guy with glasses.gif]]|right}}
Here's a page with maths related to diopters and glasses.
Here's a page with maths related to diopters and glasses.


Line 5: Line 5:
__TOC__
__TOC__
{{clear}}
{{clear}}
==The thin lens equation==
==Lenses==
[[File:Lens3.svg|right]]


[[File:Lens3.svg|right]]
The image shows a typical converging lens. The three rays drawn each have an interesting characteristic:
* the top ray enters the lens parallel with the optic axis, and so passes through the focal point on the other side
* the middle ray passes through the optical centre of the lens, and is undeviated
* the bottom ray passes through the focal point on the incident side, and so emerges parallel to the optic axis
 
===The thin lens equation===
<math>\frac{1}{f} = (\frac{1}{s}) + (\frac{1}{s'})</math>
<math>\frac{1}{f} = (\frac{1}{s}) + (\frac{1}{s'})</math>
where
where
Line 17: Line 23:
The term '''object at infinity''' is often used. When <math>s=\infty</math> is substituted into the thin lens equation, that term vanishes, so that the focal length is then just the image location. For any sufficiently large object distance, the contribution from the reciprocal becomes negligible.
The term '''object at infinity''' is often used. When <math>s=\infty</math> is substituted into the thin lens equation, that term vanishes, so that the focal length is then just the image location. For any sufficiently large object distance, the contribution from the reciprocal becomes negligible.


As the object approaches the lens, the outgoing rays converge less and less, until the object reaches the focus of the lens (<math>s=f</math>), and the transmitted light is parallel - we say it "focuses at <math>s'=\infty</math>", which means it never comes together into a focus.
As the object approaches the lens, the outgoing rays converge less and less, until the object reaches the focus of the lens (<math>s=f</math>), and the transmitted light is parallel - we say it "focuses at <math>s'=\infty</math>", which means it never comes together into a focus. (This can also be described as a virtual image at <math>s'=-\infty</math> - see below.)


===Virtual image===
===Virtual image===


When the object is brought even closer to the lens (<math>s < f</math>) the emerging rays are now diverging. When substituted into the equation, <math>s' < 0</math>. This is interpreted as a '''virtual image''', ''behind'' the lens. This is the mode in which reading glasses (plus lenses) are used - the eye is able to focus on the virtual image which appears to be further away than the real source object.
When the object is brought even closer to the lens (<math>s < f</math>) the emerging rays are now diverging. When substituted into the equation, <math>s' < 0</math>. This is interpreted as a '''virtual image''', ''behind'' the lens. This is the mode in which reading glasses (plus lenses) are used - the eye is able to focus on the virtual image which appears to be further away than the real source object.
===Diverging lens===


A diverging lens behaves in a similar way, but for distant objects - the light rays incident from the source object are refracted outwards so that they are diverging even faster. Again, a virtual focus is said to form behind the lens. The thin lens equation still works as long as you use negative numbers to describe both the (virtual) image location and the focal length.
A diverging lens behaves in a similar way, but for distant objects - the light rays incident from the source object are refracted outwards so that they are diverging even faster. Again, a virtual focus is said to form behind the lens. The thin lens equation still works as long as you use negative numbers to describe both the (virtual) image location and the focal length.


The corrective lens for [[myopia]] is a diverging lens. It works by forming a virtual image of distant objects, and it is this virtual image that the near-sighted eye is able to focus on.
The corrective lens for [[myopia]] is a diverging lens. It works by forming a virtual image of distant objects, and it is this virtual image that the near-sighted eye is able to focus on. (You can also choose to think of it as lens in series with your eye, forming a compound lens with lower power and therefore a longer focal length.)
 
===Diopters are inverse meters===
===Diopters are inverse meters===


Line 37: Line 45:
Remember that 100cm = 1m.
Remember that 100cm = 1m.


<math>D = \frac{1}{meters}</math>
<math>D = \frac{1}{ \text{meters} }</math>


conversely
conversely


<math>meters = \frac{1}{D}</math>
<math> \text{meters} = \frac{1}{D}</math>


==Calculating correction==
==Calculating correction==
Line 86: Line 94:




==Visual acuity equation==
==Visual acuity==
<math>(\frac{font\ height}{distance\ to\ sign})(\frac{180}{pi}) \times 60 = arcminutes = a</math>
[[File:TrigonometryTriangle.svg|right|TrigonometryTriangle]]
 
A reminder about some trigonometry / geometry
# <math>\tan(A) = \frac{a}{b}</math>
#* so for fixed angle, 'a' is proportional to 'b'
# for very small angles (expressed in radians), <math>\tan(A) \approx A</math>
#* so at small angles, 'a' is proportional to 'A'
# <math>1 \text{ radian} = \frac{180}{\pi} \text{ degrees} = \frac{60 \times 180}{\pi} \text{ arc-minutes} </math>
 
Acuity is a measure of the ability to resolve small details, defined by the "minimum angle of resolution". Normal vision ("20/20", or 1.0) is the ability to resolve features subtending 1 minute of arc. In order to have a bigger-is-better score, the reciprocal of the angle is usually used:
 
<math> \text{Acuity} = 1/A = \frac{pi}{60 \times 180} \times \frac{b}{a} = 0.00029 \times \frac{b}{a}</math>
 
An alternative representation of acuity is "logMAR" ("log<sub>10</sub> Minimum Angle of Resolution"). This has a bigger-is-worse direction.
* 0.0 corresponds to "20/20" (1.0 or 1 arc-minute)
* 1.0 is "20/200" (0.1 or 10 arc-minutes)
* -0.3 is "20/10" (2.0 or 0.5 arc-minutes)


Note: 5Arcminutes = 20/20
On a [[Snellen chart]] the letters are defined on a 5x5 grid: the detail to be resolved to distinguish between characters is one pixel of that grid.
Here 'b' is the distance to the chart (eg 6m) and 'a' is the height of the letters. It's not critical that the eye is at the bottom or top of a row of letters - as long as the angles remain small, the numerical error is insignificant.


Set up proportion: <math>\frac{a}{(\frac{20}{x})} = \frac{5}{(\frac{20}{20})}</math>
Acuity is reported in the form "distance/letter-row", such as "20/40", etc.


===Visual acuity (mm/metres)===
<math> \text{Acuity} = 5 \times 0.00029 \times \frac{ \text{distance to chart} }{ \text{letter height} }
<math>\frac{font\ height (mm)}{distance\ to\ sign(m)} \times 13.75 = denominator \times of \frac{20}{x}</math>
= \frac{ \text{distance to chart} }{690 \times \text{letter height} } </math>
<ref>{{cite jake|https://endmyopia.org/use-math-to-turn-any-text-into-your-own-impromptu-eyechart/}}</ref>


===Visual acuity (in/feet)===
Then, for example
<math>\frac{font\ height(in)}{distance\ to\ sign(ft.)} \times 1146 = denominator \times of \frac{20}{x}</math>
* for the "6/12" line, we need <math>690 \times \text{height} = 12m \implies \text{height} = 12m / 690 = 1.73cm</math>
* for the "20/15" line, we need <math>690 \times \text{height} = 15ft \implies \text{height} = 15 * 12 / 690 = 0.26 \text{inch}</math>


With text that we are familiar with, the brain may clear up that text more than our vision would actually allow.<ref>{{cite jake|https://endmyopia.org/use-math-to-turn-any-text-into-your-own-impromptu-eyechart/}}</ref>
The denominator can be interpreted as the distance at which the letters subtend 5 minutes of arc.


==Average axial length accomodation/rate of change==
==Average axial length accomodation/rate of change==
<math>typical\ emmetropic\ eye = 25mm = 25,000\ microns</math>
* The typical emmetropic eye is 25mm
 
* change in axial length of 1mm = 3D
<math>change\ in\ axial\ length\ of\ 1mm=3D</math>


If someone with typical eyes wanted to adapt say 20/20 to .25 less  
If someone with typical eyes wanted to adapt say 20/20 to .25 less  
Line 111: Line 137:
about 0.92microns/day - 0.69microns/day average
about 0.92microns/day - 0.69microns/day average
''Credit: [https://www.facebook.com/groups/endmyopia/permalink/759426960917375/ Mark Podowski]''
''Credit: [https://www.facebook.com/groups/endmyopia/permalink/759426960917375/ Mark Podowski]''
==Converting from Glasses to Contact Lens Prescription or vice-versa==
==Converting from Glasses to Contact Lens Prescription or vice-versa==
* [[Vertex distance]]
* [[Vertex distance]]
* [[Wikipedia:Vertex_distance|Vertex distance formula (also for astigmatism)]]
* [[Wikipedia:Vertex_distance|Vertex distance formula (also for astigmatism)]]
==See Also==
[https://wiki.endmyopia.org/wiki/Guide:Reducing_differentials#First_differentials Guide:Reducing differentials > First differentials]


==References==
==References==
{{reflist}}
{{reflist}}