Difference between revisions of Optics related math

Jump to navigation Jump to search
Divenal (talk | contribs)
m add refs section
Divenal (talk | contribs)
m Visual acuity equation: need to multipy rather than divide by 60 to convert degrees to arcminutes. I think it was just misinterpreting the original on the blog page.
Line 35: Line 35:


==Visual acuity equation==
==Visual acuity equation==
<math>(\frac{font\ height}{distance\ to\ sign})(\frac{180}{60pi}) = arcminutes = a</math>
<math>(\frac{font\ height}{distance\ to\ sign})(\frac{180}{pi}) \times 60 = arcminutes = a</math>


Note: 5Arcminutes = 20/20
Note: 5Arcminutes = 20/20
Line 48: Line 48:


With text that we are familiar the brain may clear up that text more than our vision actually operates at.<ref>{{cite jake|https://endmyopia.org/use-math-to-turn-any-text-into-your-own-impromptu-eyechart/}}</ref>
With text that we are familiar the brain may clear up that text more than our vision actually operates at.<ref>{{cite jake|https://endmyopia.org/use-math-to-turn-any-text-into-your-own-impromptu-eyechart/}}</ref>
 
==Average axial length accomodation/rate of change==
==Average axial length accomodation/rate of change==
<math>typical\ emmetropic\ eye = 25mm = 25,000\ microns</math>
<math>typical\ emmetropic\ eye = 25mm = 25,000\ microns</math>

Revision as of 09:24, 21 June 2020

Here's a page with maths related to diopters and glasses.

You don't really need to know any of this stuff to improve your eyesight, but it's good to know for deeper understanding File:Face-smile.svg

Diopters are inverse meters

See Also Diopters

See Also cm Measurement

Remember that 100cm = 1m.

D=1meters

conversely

meters=1D

Point of refraction

See also Refraction

s=distance to object (meters)

s=distance to point of refraction (meters)

f=focal length of lens (meters)

P=power of lens (diopters)

1f=(1s)+(1s)

1f=P

Visual acuity equation

(font heightdistance to sign)(180pi)×60=arcminutes=a

Note: 5Arcminutes = 20/20

Set up proportion: a(20x)=5(2020)

Visual acuity (mm/metres)

font height(mm)distance to sign(m)×13.75=denominator×of20x

Visual acuity (in/feet)

font height(in)distance to sign(ft.)×1146=denominator×of20x

With text that we are familiar the brain may clear up that text more than our vision actually operates at.[1]

Average axial length accomodation/rate of change

typical emmetropic eye=25mm=25,000 microns

change in axial length of 1mm=3D

If someone with typical eyes wanted to adapt say 20/20 to .25 less normalized within 3-4 months would need to decrease axial length 0.083mm about 0.92microns/day - 0.69microns/day average Credit: Mark Podowski

Converting from Glasses to Contact Lens Prescription or vice-versa

References